AIMS 1,000 Watt Pure Sine Inverter Charger 12 VDC To 120 VAC – PICOGLF10W12V120VR AIMS power

AIMS 1,000 Watt Pure Sine Inverter Charger 12 VDC To 120 VAC – PICOGLF10W12V120VR + Free Shipping!

This 1000 Watt Pure Sine Low Frequency Inverter with built in battery charger from AIMS is one of the best options on the market.  You can use this aims inverter to power all sorts of essential household appliances during as needed or during a power outage/emergency. This inverter is also great for RV and boat applications. 

This AIMS power inverter charger is capable of accepting any source of 120v AC power to charge batteries, including a gas or diesel generator or shore power at an RV park/truck stop. It will even accept power from an extension chord plugged into your wall outlet at home. This inverter charger is capable of a 3000 watt surge for 20 seconds and can run at 1000 watts continuously.

As an additional feature, this inverter is capable of being used worldwide by virtue of its auto frequency detection capabilities. It will run in any country that uses 120vac output. It works with type-A plugs or a direct 3-wire terminal connection. This inverter comes with a dual-plug GFCI outlet with a reset button. It will never completely drain your batteries as it’s low-voltage shut-down keeps the voltage at either 10 volts or 10.5 volts depending on your selection.

Battery & Power Saving Modes

With the battery priority mode, you can set your inverter to run directly off of a battery back-up system instead of a generator or tertiary source of AC Power. The inverter charger comes with a power saver mode that pulses every 30 seconds, attempting to detect a necessary load of 25 watts or more before it will turn on. Otherwise, the inverter will “sleep” and draw right around a half an amp per hour, saving you precious reserve power in your batteries until you need it.

Features:

• 1000 watt low frequency inverter
• 3000 watt surge for 20 seconds 300% surge capability
• Battery Priority Selector
• Terminal Block
• GFCI outlet – 10 amps
• Marine Coated and Protected
• Multi Stage Smart charger 35 Amp
• remote panel available
• auto frequency
• 10msec typical transfer time
• selectable 25W power save mode (hibernation)
• 7 battery type settings for charger

Inverter Output Specifications:

• Continuous Output Power: 1000 Watts
• Surge Rating: 3000 Watts (20 Seconds)
• Output Waveform: Pure Sine/Same as input (Bypass Mode)
• Nominal Efficiency: >88% (Peak)
• Line Mode Efficiency: >95%
• Output Frequency: 50Hz +/- 0.3Hz / 60Hz +/- 0.3Hz
• Typical Transfer Time: 10ms (Max)
• Bypass Breaker – 20 amps
• THD: < 10% DC
• Ambient operating temperature: 14°F to 122°F (-10°C to 50°C)

Input Specifications:

• Nominal Input Voltage: 12.0Vdc
• Minimum Start Voltage: 10.0Vdc
• Low Battery Alarm: 10.5Vdc-11.0Vdc
• Low battery Trip: 10.0Vdc-10.5Vdc
• High Voltage Alarm: 16.0Vdc
• Low battery Voltage Restart: 15.5Vdc
• Idle Consumption: < 12.5 watts
• Charger breaker 10 amps
• Power Saver Mode Idle Consumption: <7.5 wattsC

Charger Specifications:

• Output voltage: Depends on battery Type
• Charger Rate: 35A
• Over Charge Protection Shutdown 15.7V
• Selectable Charge setting based on battery type
• Adjustable charge current off-20%-100%
• Four Stage Smart Charger

Transfer Switch Specifications:

• 30 amp automatic transfer switch
• 10 ms (Max)

Dimensions:

• Unit Weight: 35 lbs.
• Unit Size L x W x H: 14.1 x 8.74 x 7.10 inches
• Shipping Weight: 39 lbs.
• Shipping L x W x H 20.75 x 12.75 x 12.50 inches