6,000W 120/240V Output + [9.6kWh-12kWh Lithium Battery Bank] 10-Year Warranty | 8KW Solar [BYOP-PLUS] BYOP

“Bring Your Own Panels” solar ready kits include everything you need to get hooked up with a useable, stand-alone battery based power system. Your kit includes a reliable, split phase (120/240V) output inverter along with all the parts and pieces needed to hook it up to your lithium iron phosphate battery bank, which is covered by a 10-Year Warranty. 

Whether you already have solar panels, or would like to source these yourself locally, our BYOP kits come ready to easily connect to almost any type of solar panel array. This kit does NOT include solar panels, however you can connect up to 8KW of solar panels to this system.

How Do I Recharge the Battery Bank Without Solar Panels?

Great question! You can charge your batteries through the inverter/charger three main ways: 

1. Source some solar panels and/or wind turbine (DC power) and connect them to the system.

2. Using grid power if available by plugging your system right into the grid so that if your battery gets low, you can charge it back up from the grid (just like charging a cell phone battery).

3. You can connect and use a fuel powered generator to recharge your battery bank. 

What’s Included With Your Order? 

• 1 x 6,000W Split Phase 120/240V Output Solar Inverter / Charger – 2-Year Warranty
• Choice of 1 x: Mammoth 9.6 KWH or KONG 12KWH Lithium Battery Bank (LiFePO4) – 10-Year Warranty
• 1 x 48V AC Wall Charger for Lithium Battery
• 1 x 1ft, 1/0AWG, Cables, Lug5/16” – Lug5/16”, RED
• 1 x 200A Inline Fuse Kit
• 1 x 250A Busbar (5/16” Stud) SET
• 1 x 3ft, 1/0AWG, Cables, Lug1/4″ – Lug5/16″, SET
• 1 x 3ft, 1/0AWG, SB175, Anderson – Lugs 5/16″, SET
• 1 x Wiring Schematic & Setup / Commissioning Guide
• Lifetime Customer Support

6000W 120/240V Inverter / Charger Specs: 

• Max output 6KW 120/240V Split Phase Output
• 48VDC Dual MPPT trackers (MAX 80A*2)
• Max PV array up to 8KW
• Utility charging up to 60A
• Max system charging up to 220A
• Parallel up to 3 units
• Genset starter dry contact*
• Versatile programming options FREE monitoring software
• 72 lbs

These inverters require a battery to operate and turn on. (Will not turn on via AC power  or Solar Power without a battery). Inverter and dual charge controller, capable of parallel operation of up to 3 units (6 kW each) to 18 kW.

RICH Solar 6048 Features:

This item replaces the very popular and now discontinued LV5048

These inverters require a battery to operate and turn on. (Will not turn on via AC power  or Solar Power without a battery). Inverter and dual charge controller, capable of parallel operation of up to 3 units  (6 kW each) to 18 kW.

The LV6048 (6kW) Is a 7 in 1 Solar Power System:

1. Dual Internal Pure sine wave Configurable Inverter – Configured as single phase 6kW at 120V – (0 Degree Phase shift, Output L1 and L2 connected together)
2. 6kW Split phase inverter   120V – 0 V – 120V (240V between L1 and L2)  (180 Degree Phase shift between L1 and L2)
3. a two phase 208V inverter  ( 120 Degree Phase Shift between L1 and L2 )
4. With three inverters, a three phase ( L1 , L2 and L3 being 120 Degrees apart, as in three phase systems)
5. Dual 4 kW Solar charge controllers per unit (8 kW in total)
6. 60A Utility Battery Charger  (Will automatically charge your battery from Utility power in the event of low battery voltage – remember not 60A from Utility – 60 A to Battery, 60A x 48V = 2.8kW = 23A at 120V input)
7. Internal Transfer Relay, will switch your load to Utility power if your battery Voltage drops below a user setpoint voltage.
8. Can operate as a stand along UPS system  (does not require solar panel input)  Will switch your load over to battery power in the event of power failure
9. Has programmable dry contact relay, can be triggered on a programmable range of battery voltages and levels  (can be used to start a generator, or an alarm or whatever you choose to do with it)
10. Grid Assist mode,  in two ways, will switch your load over to Utility in the event of overload, or will supplement Solar and battery from Utility.

Each 6kW unit consists of 2 x 4kW Solar Chargers – Capable of supporting a total Solar array of 8kW, of a voltage range between 60 to 110V DC, MAX DC voltage is 145V

a 12kW system (2 units) is capable of supporting a 16 kW solar array in 4 circuits of 4kW

a 18kW system (3 units) is can support 24 kW solar array in 6 circuits of 4 kW

This unit can be programmed in a variety of ways, single phase, two phase (3 phase minus one phase) and split phase (120V -0V – 120V) as found in traditional North American Homes.

• 2-Yr USA Warranty
• US Based Tech Support

Mammoth [PLUS] 9.6KWH Lithium Battery Bank Specs: 

With a 180Ah at 48V (9.6kWh or 9,600 watt hours) this powerful battery is by far one of the best and most cost-efficient batteries in its class and on the market today! Capable of being connected in parallel with up to 8 total powerwalls, you can easily build a 18kwh+ 48V battery bank with just two of these units. 

3,000-5,000 Lifecycles. 10-Year Warranty. Lifetime Customer Support.

Our 48V Powerwall comes with pre-installed Anderson connections making it ready to go for quick installation to any inverter, charge controller or bus bar. With the SB175 Anderson to ring terminal cable already included, you’ll be up and running in no time!

Mammoth [PLUS] 9.6kWh Powerwall:

• Chemistry: LiFePO4
• Voltage: 48V
• kWh: 9.6 kWh
• Amp Hours: 180 Ah
• Operating Voltage Range: 43V – 58.8V
• Charging Voltage Range: 55.6V – 58V
• Max Charging Voltage: 58.8V
• Cell Configuration: 16S
• Charge Temperature Range: 0°C – 55°C
• Discharge Temperature Range: -30°C – 55°C
• Optimal Discharge Temp. Range: 15°C – 35°C
• Storage Temperature Range: -5°C – 35°C (Max 6 months)

BMS Specs

• Max Continuous Discharge: 175A
• Max Continuous Power: 7000W
• Max Peak Discharge: 350A (Over 6 seconds)
• Max Charge Current: 120A

Battery Size

• Weight: 235 lbs
• Width: 10.6 in
• Length: 20.8 in
• Height: 31.5 in

Mammoth [PLUS] 9.6kWh Lithium Battery Features:

• Top Selling Power Wall 
• Best Price/kWh
• LED Display
• Compact Modular Design
• High Temp Operating Range
• Engineered Triple-Safety Redundancy
• New LG NMC Modules
• Easy Installation w. Anderson Connectors
• Best Power Density/Pack Size
• High Performance: C-Rate (Charge/Discharge)

*This pack connects via Anderson Quick-Connect SB175 Cables.

Warranty & Guarantee:

• Made in the USA
• 10-Year Warranty!
• Lifetime Customer Support (Phone, Live Chat Or Email)

3,000-5,000 Lifecycles. 10-Year Warranty. Lifetime Customer Support. 

KONG 48V 12KWH Lithium Battery Bank Specs:

•  LED Display
•  Compact Modular Design
•  High Temp Operating Range
•  Best Power Density/Pack Size
•  Best Aluminum Mosfet Design
•  3000 A Short Circuit Protection
•  High Cold-Cranking Amps (400A)

Warranty & Guarantee:

• Made in the USA
• 10-Year Warranty!
• Lifetime Customer Support (Phone, Live Chat Or Email)

48V KONG Spec Sheet:

48V KONG 12kWh Powerwall Specs:

• Chemistry:LiFePO4 (New)
• Configuration:16S 1P
• Voltage: 48V
• Ah Capacity: 233Ah
• kWh Capacity: 12kWh
• Wh Capacity: 12,000Wh

Performance Specs:

• Max Continuous Discharge Current: 150A
• Max Continuous Power: 7500W
• Max Discharge Peak Current: 350A (6 Seconds)
• Voltage Range: 43 – 58.8V

Charging Specs:

• Suggested Charge Voltage: 58.8V
• Max Charge Current: 90A

Temperature Parameters:

• Charge Temp Range (°C): 0°C – 55°C
• Discharge Temp Range (°C): -30°C – 55°C
• Optimal Discharge Temp. Range: 15°C – 35°C
• Storage Temp: -20°C –  35°C (Max 6 Months)

48V KONG 12kWh Powerwall Dimensions:

• Weight: 372 (LBS)
• Length: 25.5 (in)
• Width: 15 (in)
• Height: 46.5 (in)

Safety Features:

• BMS (Battery Management System) 
• Over Voltage, Under Voltage, Over-Current
• (Thermal Management System), Breaker (300A)

Max battery Connections:

• Series: N/A
• Parallel: (YES) Cap x (8)

Warranty & Guarantee:

• Made in the USA
• 10-Year Warranty!
• Lifetime Customer Support (Phone, Live Chat Or Email)

Still have questions? Don’t hesitate to reach out or give us a call today at 877-242-2792