2 x MPP LV6048’s 12,000W 48V 120/240 All-in-One Solar Inverter / Charger | Split Phase 120V/240V MPP Solar

2 x MPP Solar LV6048 | 12,000W 48V All-in-One Solar Inverter / Charger | Split Phase 120V/240V – 2 x 80MPPT Inputs (16Kw Solar) Parallel up to 18kw & FREE Lifetime After-Sale Support

The MPP LV6048 is simplifying off-grid solar power.  This is a complete solar system in a box.  These units have been a staple in the off-grid solar power community for years for good reason.  All you need to do is mount the box to the wall, connect your panels and your batteries and you’re in business.  Thats it.  You have a fully functioning off-grid solar kit.  

The LV6048 is a perfect beginner friendly option for someone who wants to power an off-grid cabin, RV or Van.  A super simple set up will allow you to be off-grid and boondocking in no time.  

With 2 x MPP LV6048’s paralleled together – you’ll have 12,000W continuous at 48V with a massive, 16,000W of solar pv input (8kw per unit). 

 

MPP Solar LV6048 Features:

This item replaces the very popular and now discontinued LV5048

These inverters require a battery to operate and turn on. (Will not turn on via AC power  or Solar Power without a battery). Inverter and dual charge controller, capable of parallel operation of up to 3 units  (6 kW each) to 18 kW.

What’s Included?

• 2 x MPP Solar LV6048’s (12,000W Continuous, 48V, 120/240 Output)
• Parallel Kits for Pairing Both Units
• Lifetime Customer Support
• 1-Year Warranty
• North American Support

The LV6048 (6kW) Is a 7 in 1 Solar Power System:

   1 )  Dual Internal Pure sine wave Configurable Inverter – Configured as single phase 6kW at 120V,   (0 Degree Phase shift, Output L1 and L2 connected together)

   2) 6kW Split phase inverter   120V – 0 V – 120V (240V between L1 and L2)  (180 Degree Phase shift between L1 and L2)

   3) a two phase 208V inverter  ( 120 Degree Phase Shift between L1 and L2 )

   4) With three inverters, a three phase ( L1 , L2 and L3 being 120 Degrees apart, as in three phase systems)

   5)  Dual 4 kW Solar charge controllers per unit  (8 kW in total )

   6) 60 A Utility Battery Charger  (Will automatically charge your battery from Utility power in the event of low battery voltage – remember not 60A from Utility – 60 A to Battery, 60A x 48V = 2.8kW = 23A at 120V input)

   7) Internal Transfer Relay, will switch your load to Utility power if your battery Voltage drops below a user setpoint voltage.

   8)  Can operate as a stand along UPS system  (does not require solar panel input)  Will switch your load over to battery power in the event of power failure

   9)  Has programmable dry contact relay, can be triggered on a programmable range of battery voltages and levels  (can be used to start a generator, or an alarm or whatever you choose to do with it)

   10) Grid Assist mode,  in two ways, will switch your load over to Utility in the event of overload, or will supplement Solar and battery from Utility.

Each 6kW unit consists of 2 x 4kW Solar Chargers – Capable of supporting a total Solar array of 8kW, of a voltage range between 60 to 110V DC, MAX DC voltage is 145V

a 12kW system (2 units) is capable of supporting a 16 kW solar array in 4 circuits of 4kW

a 18kW system (3 units) is can support 24 kW solar array in 6 circuits of 4 kW

This unit can be programmed in a variety of ways, single phase, two phase (3 phase minus one phase) and split phase (120V -0V – 120V) as found in traditional North American Homes.

• 1Yr USA Warranty
• US Based Tech Support
• 7-10 days for shipping!